Adhesion Testers for Bond Strength Measurements
Introducing Our Adhesion Testers
- Featuring an integrated design that combines the oil pressure system and digital pressure display, our adhesion testers offer unparalleled stability and ease of use.
- Made of high-strength aluminium alloy, the entire machine is lightweight and durable, perfect for on-site testing applications.
- Built-in data storage capabilities streamline the testing process, enhancing user-friendliness and efficiency.
Applications of Adhesion Testers
- These testers are widely used in construction quality control to assess the bond strength between various construction materials.
- Adhesion testing equipments play a crucial role in infrastructure maintenance by evaluating the bond strength of repair materials.
- They can be used as thermal insulation material for construction projects, exterior wall veneer brick, mortar, and various plates.
- Bond strength testing equipment is essential tools in the coatings and paint industry for evaluating the bond strength of coatings and paints to substrate.
Product Comparison
Expedite your selection process with our bond testing equipment’s product comparison. Assess accuracy, versatility, and ease of use to find the perfect tool for your surface adhesion testing requirements.
|
Model
|
P10 Pull-off Tester
 |
PA10 Automatic Pull-off Tester
 |
P6 Pull-off Tester
 |
Pull-off Tester LR-P40
 |
P16 Pull-off Tester
 |
P25 Pull-off Tester
 |
|---|---|---|---|---|---|---|
|
Measurement range |
0-10kN |
0.1-10kN |
0.6-6kN |
4-40.000kN |
1.6-16kN |
2.5-25kN |
|
Resolution |
- |
0.001kN |
0.001kN |
0.001kN |
0.001kN |
0.001kN |
|
LCD screen |
Segment LCD + blue backlight |
2.0'' colorful LCD (320*240) |
Segment LCD + blue backlight |
Segment LCD + blue backlight |
Segment LCD + blue backlight |
Segment LCD + blue backlight |
|
Display mode |
kN、MPa |
kN、MPa |
kN、MPa |
kN |
kN |
kN |
|
Accuracy level |
EN ISO 7500-1 Class 1 |
EN ISO 7500-1 Class 1 |
EN ISO 7500-1 Class 1 |
EN ISO 7500-1 Class 1 |
EN ISO 7500-1 Class 1 |
EN ISO 7500-1 Class 1 |
|
Pulling stroke |
65mm |
30mm |
10mm |
8mm |
5mm |
5mm |
|
Data storage |
More than 500 |
2,000 pieces of data |
More than 500 |
500 or more |
4000 |
4000 |
|
Power supply mode |
3.7V rechargeable lithium battery |
Li-On rechargeable |
- |
3.7V lithium battery |
2 “AAA” dry batteries |
2 “AAA” dry batteries |
|
Peak hold |
YES |
YES |
YES |
YES |
YES |
YES |
|
Liquid crystal lighting |
YES |
YES |
YES |
YES |
YES |
YES |
|
Host weight |
3.2kg |
5kg |
2kg |
4.3kg |
3.8kg |
3.8kg |
Achieve Reliable Results with LANGRY's Adhesion Testers!
Frequently Asked Questions
Adhesion testers typically apply a controlled force to separate or pull apart a material from its substrate. The force required to break this bond is measured and recorded, providing a quantitative assessment of adhesion strength.
Calibration frequency for adhesion testers may vary depending on factors such as usage frequency, environmental conditions, and industry standards. It is generally recommended to calibrate the tester regularly, typically annually, to ensure accurate and reliable test results.